Products / Cables and conductors / Control and instrumentation cables / RE-2Y(St)YSWAY-fl-PIMF
| RE-2Y(St)YSWAY-fl-PIMF |
 |
| For data transmission for fixed and mobile installations in process control and data processing systems |
|
 |
| EN 50288-7 |
| DIN VDE 819-7 |
| |
 |
|
Тези кабели се използват за трансфер на данни в измервателна и контролна апаратура. Екранът от метално фолио защитава веригите от въздействието на външни сигнал.
Кабелите са подходящи за неподвижен монтаж в сухи и мокри помещения, както и за полагане на открито по стените на сгради, когато се изисква локализиране и неразпространение на горенето.
|
|
 |
| Conductor: |
Cu conductor with nominal section: |
| 0,5mm2 - cl. 2 or cl. 5 |
| 0,75mm2 - cl. 2 or cl. 5 |
| Cable pair: |
Two wires twisted in pairs |
| PiMF: |
Screen over each pair of polyester foil, tinned copper conductor 0.6mm and Al tape with polyester foil |
| Insulation: |
XLPE |
| Cable core: |
couples twisted in bundle |
| Zone insulation: |
few layer plastic tapes |
| Screen: |
laminated polyester tape and copper contact multi wire conductor with nominal cross-section 0,5mm2 |
| Inner sheath: |
PVC compound |
| Armor: |
galvanized steel wire |
| Outher sheath: |
PVC with fire retanrdance |
 |
| Temp. characteristic: |
|
| tº of installation: |
fixed:-5°C/+50°C |
| mobile:-30°C/+65°C |
| L/R factor - max. µH/Ω: |
25 |
| Test voltage 50Hz 1 min: |
core-core 1000V |
| core-screen 1500V |
| Operating voltage max: |
300V |
| R of conductor max Ω/km: |
cross-section 0,5mm2-0,75mm2 class 2: 36.8/25.0 |
| cross-section 0,5mm2-0,75mm2 class 5: 38.2/25.5 |
| Insulation resistance min: |
5GΩ.km |
| Working capacitance 800Hz max: |
100nF/km |
| Capacitance unbalanced in 800Hz K1 - max: |
250pF/250m |
| Behaviour on fire: |
IEC 60332-3/C |
| Min. bending radius: |
10xD |
|
